9803 Sector Light  (red, green, blue, scale ) 
pWAD: http://www3.telus.net/NeoHippo/MAPS/dl9801.wad
Although I have given the three lights different values for scale,
they all seem to be rendered at the same brightness.
Am I using scale properly, or am I doing something wrong?
			
			
									
						
							9803 Sector Light - Help needed
Moderator: Graf Zahl
- 
				NeoHippo
														 - Posts: 408
 - Joined: Tue Sep 13, 2005 0:47
 - Location: British Columbia Canada
 
9803 Sector Light - Help needed
TAtL, tU, aE
			
						- 
				Enjay
														 - Developer

 - Posts: 4759
 - Joined: Tue Aug 30, 2005 23:19
 - Location: Scotland
 
- 
				NeoHippo
														 - Posts: 408
 - Joined: Tue Sep 13, 2005 0:47
 - Location: British Columbia Canada
 
- 
				NeoHippo
														 - Posts: 408
 - Joined: Tue Sep 13, 2005 0:47
 - Location: British Columbia Canada
 
I think I got it. The values I chose for scale were too big for the size sector.
In dl9803n2.wad I decreased the scale values considerably. What it really does is,
it varies the diameter of the illuminated area. A given scale value will produce
always the same light size, regardless of sector size. To find the optimal light size
for a given sector, adjust the scale value up or down.
			
			
									
						
							In dl9803n2.wad I decreased the scale values considerably. What it really does is,
it varies the diameter of the illuminated area. A given scale value will produce
always the same light size, regardless of sector size. To find the optimal light size
for a given sector, adjust the scale value up or down.
TAtL, tU, aE